While some types of wood naturally produce chemicals that help protect against this, others are highly susceptible and therefore unsuitable for use in boat building. techniques. as wood has been used in boat construction for eons, there are a raft of techniques that can be used to put vessels together.. 4 wooden boat building techniques. there are four basic wooden boat building construction techniques used by home boat builders. these are the stitch and tape, the ply on frame, the strip planking, and the clinker ply.. Thousands of species of wood grow throughout the world. boat building requires a certain wood that has characteristics suitable for a marine environment. boat building wood can not be too soft, brittle, decay-prone, light and airy, or too short to fabricate necessary lengths for keels and planking..
* wood – the traditional boat building material that was and is still used for hull and spar construction. it is buoyant, cheap, widely available and easily worked. as such, it is a popular material for amateur builders, especially for small boats (of e.g. 6-metre length; such as dinghies and sharpies).. Since building of wooden boats is a very old tradition and skill, it has always depended on local materials. the vikings did definitely not get mahogany or teak anywhere, but they had vast forests full of a variety of good building material, mostly pine and fir.. Clinker and carvel – different types of planking introduction. clinker is a method of constructing hulls of boats by fixing wooden planks so that the planks overlap along their edges. the overlapping joint is called a land..
